Tr o u b l e s h o o t i n g

Results Are Not as Expected

To make use of all the Display Manager System features, make sure that you are using a VGA monitor cable with all the pins in position.

The environment might not have been dark enough. Repeat the calibration and characterization with a dark cloth covering the monitor.

The sensor, if it has suction cups, might have fallen off during the process. Repeat the process making sure that the sensor is firmly attached.

Make sure that the Dark Gain Correction of the sensor is performed correctly.

Make sure that your monitor color quality is set to the highest possible value (at least 16 bits).

Make sure to warm up the monitor for a least one hour before using the Display Manager System.

Make sure that the screen saver and power save mode do not come on during the process.

Set your screen resolution to at least 1280 x 1024.

If using an HD/SD display or digital projector, use the Manual Characterization Assistant to accurately profile the display. See “Manual Characterization” on page 44.

Input all data available for your specific process. See “Setting the Options” on page 24.

Your scanner or recorder might be out of calibration.

Characterize and Verify Controls Are Not Visible on LINUX System

Configure your panel (taskbar) to allow other windows to appear above. Or set your panel to autohide.

8 6

K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e

Page 96
Image 96
Kodak 4F3882 manual Results Are Not as Expected