Q-Logic SN0054621-00 E manual Dspchap, Dtdspa, Dtdupd, Display a Chap Table

A

5– Non-Interactive Mode Commands Non-interactive Commands

-dr <hba_port_inst>

For information on the interactive version of this command, “Display Default Router List (IPv6) (CLI Option -dr)” on page 4-33.

-dspchap

(Display a CHAP Table)

To view the CHAP table, enter the -dspchapcommand as follows:

-dspchap <hba_port_inst>

For information on the interactive version of this command, see “Display CHAP Table (CLI Option -dspchap)” on page 4-41.

-dtdsp

(Display Discovered Targets)

To view the discovered targets that are not persistent, enter the -dtdspcommand as follows:

-dtdsp <hba_port_inst>

For information on the interactive version of this command, “Display Discovered Targets” on page 4-45.

-dtdspa

(List Targets)

To view discovered targets, including persistent and non-persistent, enter the -dtspacommand as follows:

-dtspa <hba_port_inst>

For information on the interactive version of this command, “List Targets (CLI Option -t)” on page 4-37.

-dtdupd

(Duplicate a Discovered Target)

To duplicate a discovered target that is not persistent, enter the -dtdupdcommand as follows:

-dtupd <hba_port_inst> <target_instance>

To obtain the target instance, use the command “-dtdsp (Display Discovered Targets)” on page 5-9.

A duplicate target is assigned a new iSCSI initiator ID (ISID) and can then be used to create a redundant path.

For information on the interactive version of this command, “Duplicate a Discovered Target” on page 4-46.

SN0054621-00 E 5-9