ENGLISH

Handling precautions

Camera's detailed operations

Camera User Guide

Software operations

Software Starter Guide

Detailed software operations

ZoomBrowser EX Software User Guide (Windows®) ImageBrowser Software User Guide (Macintosh)

(These PDF format manuals are available on the Canon website. Please download them from the following URL: http://www.canon.co.jp/Imaging/ information-e.html)

This guide explains the required operations the first time the camera is used, how to download images to a computer, as well as connecting to a printer for direct printing. For usage precautions and detailed instructions, please refer to the manuals listed above.

Please refer to the Troubleshooting section of the Software Starter Guide if you have trouble installing the software or downloading images.

Do not connect the camera to the computer before the software is installed.

CDI-E095-010

XX02XXXX

XXXXXX

© 2003 CANON INC.

PRINTED IN MALAYSIA

Step 1 Preparing the Camera

1.Install the batteries.

Slide the battery cover lock and open the battery cover.

Insert the batteries as shown and close the

Positive end

battery cover.

 

Negative end

Step 2 Shooting

 

1. Turn on the power.

ON/OFF Button

Hold the ON/OFF button down until the indicator next to the viewfinder starts

 

blinking green.

 

 

Indicator

2.Turn the mode switch to (shooting) and set the mode dial to .

3. Set the date and time. (first time the camera is powered on)

Use the left or right button to select the items you wish to set, and use the up or down button to change the value.

To put the settings into effect, press the button.

4. Focus.

Point the camera in the direction of the subject you wish to shoot and press the shutter button halfway. The camera beeps twice when the subject is in focus.

5.Shoot.

Press the shutter button fully. The shutter sound will sound once when the shot has been taken. The recorded image is displayed on the LCD monitor for approximately 2 seconds.

Turn off the power.

ON/OFF Button

Press the ON/OFF button. Even if you do not press the ON/OFF button, the power will automatically shut down 3 minutes after the last control is accessed.

Step 3 Reviewing an Image

 

1. Turn on the power.

ON/OFF Button

Hold the ON/OFF button down until the indicator next to the viewfinder starts

 

blinking green.

 

 

Indicator

2. Set the mode switch to (Replay).

The last recorded image appears in LCD monitor.

3. View the images.

Use the left or right button to display the image you wish to see.

To Delete an Unwanted Image

1. Select the unwanted image using the left or

2.Install the CF card.

Slide the CF card slot cover in the direction of the arrow, and open it.

Insert the CF card with its label facing out until the CF card eject button fully extends and dose the CF card slot.

Mark

Label Side

CF Card Eject Button

right button and press the button.

2. When the confirmation screen appears, check that [Erase] is selected and press the button.

Select [Cancel] using the left or right button to cancel without erasing.

Continued on the reverse side.

Page 1
Image 1
Canon A70 manual Preparing the Camera, Shooting, Reviewing an Image