Samsung SLC410WXAC, SLC410WXAA manual Wired network setup, IPv4 configuration using SetIP Windows

Wired network setup

You must set up the network protocols on your machine to use it on your network.

You can use network after connecting network cable to a corresponding port on your machine.

•For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program.

-See "Using SyncThru™ Web Service" on page 164.

-See "Setting IP address" on page 96.

Printing a network configuration report

You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network.

•The machine does not have the display screen: Press the (Cancel or Stop/Clear) button for two seconds on the control panel.

Using this Network Configuration Report, you can find your machine’s MAC address and IP address.

For example:

•MAC Address: 00:15:99:41:A2:78

•IP Address: 165.254.192.192

5

Setting IP address

• The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 19)

• TCP/IPv6 is not supported by this program.

First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall.

The following instructions may differ for your model.

1Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or

Downloads).

2Follow the instructions in the installation window.

3Connect your machine to the network with a network cable.

2. Using a network-connected machine 96