Hitachi CP-WX4021N, CP-X5021N user manual Microphone function, Speakers Monitor

Setting up

Connecting with your devices (continued)

Speakers

Monitor

(with an amplifier)

Microphone	Wired
system
	remote
	control
	(optional)

(￿45)

(￿46)

NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker.

• This projector doesn't support plug-in power for the microphone.

Microphone function

•You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output. You can input line level signal to the MIC port from equipment such as wireless microphone. Select HIGH in the MIC LEVEL item of the AUDIO menu when you input line level audio signal

to the MIC port. In the normal mode, the volume of the microphone can be adjusted separately from the volume of the projector using the menu. (￿46, 47) In the standby mode, the volume of the microphone is adjustable with the

VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector. (￿19)

Even when the sound of projector is set to mute mode by the AUDIO SOURCE function (￿46), the volume of the microphone is adjustable.

In both modes (standby or normal), the MUTE button on the remote control works on the sounds of the microphone and the projector. (￿19)

•This projector doesn't support plug-in power for the microphone.

14