INPUT menu
INPUT menu
From the INPUT menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons switches the progress mode.
TV FILM OFF
• This function works only for a video signal,
video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMI PROGRESSIVE signal (of 480i@60 or 576i@50 or 1080i@50/60).
•When TV or FILM is selected, the screen image will be sharp. FILM adapts to the
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH MID LOW
VIDEO NR
•This function works only for a video signal,
Using the ▲/▼ buttons switches the mode for color space.
AUTO RGB SMPTE240 REC709 REC601
• This item can be selected only for a computer signal (except for COLOR SPACE signals from the LAN, USB TYPE A and USB TYPE B ports) or a
component video signal (except SCART RGB).
•The AUTO mode automatically selects the optimum mode.
•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.
Using the ▲/▼ buttons switches the function of the COMPONENT ports.
COMPONENT SCART RGB
COMPONENT When the SCART RGB is selected, the COMPONENT (Y, Cb/ Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer.
(continued on next page)
39
