Troubleshooting | Woodstock W1667 specs

Troubleshooting

Use this table to isolate and correct any problems with your drill press. If you cannot correct a problem, contact Woodstock International, Inc. at 1-360-734-3482 or tech-support@shopfox.biz.

MAINTENANCE

-26-

Image 28

Woodstock W1667 instruction manual Troubleshooting

Contents

81⁄2 Oscillating Drill Press Page Contents Woodstock Service and Support About Your W1667 8 1⁄2 Oscillating Drill Press Warranty and Returns Specifications Standard Safety Instructions Disconnect machine when cleaning, adjusting or servicing Additional Safety Instructions for Drill Presses Keep proper footing and balance at all times Avoiding Potential Injuries Never drill while holding Workpiece by hand Grounding 110V OperationExtension Cords Assembly Box Contents To install the base and column, do these steps To install the dust port, do these stepsBase and Column Dust Port To install the table, do these steps Loosely installing table lock lever Headstock Aligning the pocket in the headstock With the column To install the drill chuck, do these steps To install the handles, do these stepsDrill Chuck Handles To adjust the drive belt tension, do these steps Belt Tension To adjust the feed shaft spring tension, do these steps Feed Shaft Spring Tension Quill-Shaft Screw Hold the spring cover tightly Table Height / Tilt Support table while loosening lock Drilling Speed Loosening the lock knob To adjust the drilling depth, do these steps Drill Press RPM ChartDrilling Depth Adjustments Adjustments Operations Starting the Drill Press Drill/Drum Changes To change drill bits and sanding drums, do these steps To use the oscillating feature, do these steps Using the OscillatorRemove the spindle handles Sanding drum installed General Table and BaseLubrication Sanding Sleeves Troubleshooting Parts Diagram Parts List Drill Press Accessories Drill Press Accessories Warranty Card BOX BELLINGHAM, WA