Contents
81⁄2 Oscillating Drill Press
Page
Contents
About Your W1667 8 1⁄2 Oscillating Drill Press
Woodstock Service and Support
Specifications
Warranty and Returns
Disconnect machine when cleaning, adjusting or servicing
Standard Safety Instructions
Keep proper footing and balance at all times
Additional Safety Instructions for Drill Presses
Never drill while holding Workpiece by hand
Avoiding Potential Injuries
110V Operation
Grounding
Extension Cords
Box Contents
Assembly
To install the dust port, do these steps
To install the base and column, do these steps
Base and Column
Dust Port
Loosely installing table lock lever
To install the table, do these steps
Aligning the pocket in the headstock With the column
Headstock
To install the handles, do these steps
To install the drill chuck, do these steps
Drill Chuck
Handles
Belt Tension
To adjust the drive belt tension, do these steps
Feed Shaft Spring Tension
To adjust the feed shaft spring tension, do these steps
Hold the spring cover tightly
Quill-Shaft Screw
Support table while loosening lock
Table Height / Tilt
Loosening the lock knob
Drilling Speed
Drill Press RPM Chart
To adjust the drilling depth, do these steps
Drilling Depth
Adjustments
Adjustments
Starting the Drill Press
Operations
To change drill bits and sanding drums, do these steps
Drill/Drum Changes
Using the Oscillator
To use the oscillating feature, do these steps
Remove the spindle handles
Sanding drum installed
Table and Base
General
Lubrication
Sanding Sleeves
Troubleshooting
Parts Diagram
Parts List
Drill Press Accessories
Drill Press Accessories
Warranty Card
BOX BELLINGHAM, WA