Contents
81⁄2 Oscillating Drill Press
Page
Contents
Woodstock Service and Support
About Your W1667 8 1⁄2 Oscillating Drill Press
Warranty and Returns
Specifications
Standard Safety Instructions
Disconnect machine when cleaning, adjusting or servicing
Additional Safety Instructions for Drill Presses
Keep proper footing and balance at all times
Avoiding Potential Injuries
Never drill while holding Workpiece by hand
Grounding
110V Operation
Extension Cords
Assembly
Box Contents
Base and Column
To install the base and column, do these steps
To install the dust port, do these steps
Dust Port
To install the table, do these steps
Loosely installing table lock lever
Headstock
Aligning the pocket in the headstock With the column
Drill Chuck
To install the drill chuck, do these steps
To install the handles, do these steps
Handles
To adjust the drive belt tension, do these steps
Belt Tension
To adjust the feed shaft spring tension, do these steps
Feed Shaft Spring Tension
Quill-Shaft Screw
Hold the spring cover tightly
Table Height / Tilt
Support table while loosening lock
Drilling Speed
Loosening the lock knob
To adjust the drilling depth, do these steps
Drill Press RPM Chart
Drilling Depth
Adjustments
Adjustments
Operations
Starting the Drill Press
Drill/Drum Changes
To change drill bits and sanding drums, do these steps
To use the oscillating feature, do these steps
Using the Oscillator
Remove the spindle handles
Sanding drum installed
Lubrication
General
Table and Base
Sanding Sleeves
Troubleshooting
Parts Diagram
Parts List
Drill Press Accessories
Drill Press Accessories
Warranty Card
BOX BELLINGHAM, WA