Operating
Temporarily freezing the screen
FREEZE button
1. Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu (
50)), and the projector will go into the FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY
FREEZE 
PAGE 
VOLUME
UP
ON
DOWN
OFF
KEYSTONE | MY BUTTON | MUTE |
12
●The projector automatically exits from the FREEZE mode when some control buttons are pressed.
●If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long.
●Images might appear degraded when this function is operated, but it is not a malfunction.
Temporarily blanking the screen
1. Press BLANK button on the remote control.
The BLANK screen will be displayed instead of the screen of
input signal. Please refer to BLANK item in SCREEN menu (
48).
To exit from the BLANK screen and return to the input signal screen, press BLANK button again.
●The projector automatically exits from the BLANK mode when some control buttons are pressed.
BLANK button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY
FREEZE 
PAGE 
VOLUME
UP
ON
DOWN
OFF
KEYSTONE | MY BUTTON | MUTE |
1 2
CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use one of methods below.
-Use the supplied lens cover.
-Use the BLANK function above.
Taking any other action may cause the damage on the projector.
NOTE • The sound is not connected with the BLANK screen function. If necessary, set the volume or mute first. To display the BLANK screen and mute the sound at one time, use AV MUTE function (
19).
28
