Operating
Using the automatic adjustment feature
1. | Press AUTO button on the remote control. | AUTO button |
| ||
Pressing this button performs the following. |
|
For a computer signal
The vertical position, the horizontal position and the horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY
FREEZE 
PAGE 
VOLUME
UP
ON
DOWN
OFF
KEYSTONE | MY BUTTON | MUTE |
12
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (40). The vertical position and horizontal position will be automatically set to the default.
For a component video signal
The vertical position and horizontal position will be automatically set to the default. The horizontal phase will be automatically adjusted.
●The automatic adjustment operation requires approx. 10 seconds. Also please note that it may not function correctly with some input.
●When this function is performed for a video signal, a certain extra such as a line may appear outside a picture.
●When this function is performed for a computer signal, a black frame may be displayed on the edge of the screen, depending on the PC model.
●The items adjusted by this function may vary when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (
59).
Adjusting the position
1. Press POSITION button on the remote control when no menu is indicated.
The “POSITION” indication will appear on the screen.
2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation.
To complete this operation, press POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
KEYSTONE | MY BUTTON | MUTE |
12
POSITIONMENU
ENTER
ESCRESET
●When this function is performed on a video signal or an
●When this function is performed on a video signal or
●If POSITION button is pressed when a menu is indicated on screen, the displayed picture does not move its position but the menu does.
●This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port.
24
