SETUP menu
Item | Description | |
| Using the ▲/▼ buttons corrects the vertical keystone distortion. | |
| Shrink the top of the image Shrink the bottom of the image. | |
| • The adjustable range of this function will vary among inputs. For | |
KEYSTONE | some input, this function may not work well. | |
• When the horizontal lens shift is not set to the center, this function | ||
| ||
| may not work well. | |
| • This function is unavailable when the TRANSITION DETECTOR | |
| (74) is ON or the screen is adjusted by PERFECT FIT (26). | |
| Selecting this item displays the KEYSTONE_PERFECT FIT dialog. | |
PERFECT FIT | For details, see PERFECT FIT in Correcting the distortion (26). | |
• This is unavailable when the TRANSITION DETECTOR is ON | ||
| ||
| (74). | |
| Using the ▲/▼ buttons turns on/off the AUTO ECO MODE. | |
| ON OFF | |
AUTO ECO MODE | • When ON is selected, the projector will always be set to Eco mode | |
| at | |
| message “AUTO ECO MODE” will be displayed for tens of seconds | |
| when the projector starts with this function activated. | |
| Using the ▲/▼ buttons turns off/on the Eco mode. | |
| NORMAL ECO | |
ECO MODE | • When the ECO is selected, acoustic noise and screen brightness | |
| are reduced. | |
| • When AUTO ECO MODE (above) is set to ON, the projector will | |
| always be set to Eco mode at | |
| Using the ▲/▼ buttons switches the mode for mirror status. |
MIRROR | NORMAL H:INVERT V:INVERT H&V:INVERT |
If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (74) will be displayed when projector is restarted after the AC power is turned off.
(continued on next page)
44
