Internal temperature is rising | Hitachi CP-WX4021N, CP-X5021N

Troubleshooting

Related messages (continued)

Message

Description

The internal temperature is rising.

Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conﬁrmed the following items, please turn the power ON again.

•Is there blockage of the air passage aperture?

•Is the air ﬁlter dirty?

•Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

A note of precaution when cleaning the air ﬁlter. Please immediately turn the power off, and clean or change the air ﬁlter referring to the Cleaning and replacing the air ﬁlter section of this manual. After you have cleaned or

changed the air ﬁlter, please be sure to reset the ﬁlter timer (56,91).

The button operation is not available.

Page 96

Image 96

Hitachi CP-WX4021N, CP-X5021N user manual Internal temperature is rising, Button operation is not available

Contents

About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Features Checking the contents of package Part names Projector Control panel and Lens adjusters Rear panel 10 ~ LAN portControl port Audio IN1 port Remote control Down button Volume + buttonComputer button STANDBY/ON button Setting up ArrangementCP-X4021N, CP-X5021N CP-WX4021N 1610Screen Projection Screen height Size Distance Projection Screen height Distance Do not place the projector on a metal stand Connecting with your devices About Plug-and-Play capability Connecting with your devices Computer Computer Access point USBStorage Device Digital VCR/DVD/Blu-ray Disc player Video Device Microphone Wired System Remote Control Optional Microphone functionSpeakers Monitor Connecting to a power supply Using the security bar and slotPower cord Anti-theft chain or wire Security bar Security slot Remote control Installing the batteriesAbout the remote control signal Hitachi MAXELL, Part No.LR6 or R6P Changing the frequency of remote control signal Using as a simple PC mouse & keyboard Power on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the sound Press the MY Source / DOC. Camera button on Computer buttonVideo button MY Source Searching an input signal For a computer signalFor an Hdmi signal Selecting an aspect ratio Adjusting the projector’s elevator Adjusting the lens Focus ring Zoom ring Lock Horizontal adjuster lockHorizontal Vertical Using the automatic adjustment feature Adjusting the position Correcting the distortion Auto Perfect FIT Using the magnify feature Magnify ON/OFF button Temporarily freezing the screen Temporarily blanking the screenFreeze button Blank button Using the menu function Easy MenuAdvanced Menu Indication in OSD On Screen Display Indication Meaning Picture Mode AspectAuto Keystone Keystone ECO Mode ResetMirror Filter Time Picture menu BrightnessContrast Gamma Color Temp ColorTint Sharpness Presentation Theater OFFActive Iris SAVE-1, SAVE-2, SAVE-3, SAVE-4 For a computer signal For an Hdmi signalImage menu Position USB Type B or Hdmi port Phase Auto AdjustSize Execute Input menu TV Film OFFHigh MID LOW Video NR Video Format Hdmi FormatHdmi Range Auto Sync on G OFF ComputerFrame Lock On OFF Resolution Setup menu Auto ECO Mode Normal ECONormal Hinvert Vinvert H&VINVERT Normal Saving Volume Audio menuSpeaker Audio Source MIC Volume Hdmi AudioMIC Level Screen menu English Français Deutsch EspañolBlank Start UP Capturing error has occurred. Please try again MyScreenMyScreen registration is ﬁnished MyScreen Lock No Input is DetectedSync is OUT of Range Invalid Scan Freq Source Name Template Test Pattern DOT-LINE1 DOT-LINE2 DOT-LINE3 Description Closed Caption DisplayMode Channel Direct Power Option menuAuto Search Auto Auto Power OFFUSB Type B Cancel OK Lamp TimeAir ﬁlter MY Button Computer IN1 Computer IN2 LAN USB Type a Video S-VIDEO Component Hdmi USB Type B Service FAN SpeedGhost Filter Message Control Panel Remote Control KEY LockRemote Freq 1NORMAL 2HIGH Serial Settings Communication TypeBaud Rate Parity Response Limit Time Transmission MethodStack Factory Reset Information Setup Dhcp Network menuDynamic Host Conﬁguration Protocol Default Setup GatewayIP Address Subnet Projector Name MY Image AMX D.D Quit Presentation Multi PC User Name Guide Password Security menuEnter the Security menu Security Turning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN code Transition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Indicator MY TextWriting Stack Lock Presentation tools PC-LESS PresentationSupported storage media Supported format Thumbnail mode Operating by buttons or keys Button operationDown Enter Input Operating by the menu on the Thumbnail screen This ﬁle seems to be broken or not supported format Full Screen Mode Slideshow mode Return Playlist USB Display Right-Click menu Options window Maintenance Replacing the lampType number DT01171 Replacing the lamp High Voltage High Temperature High Pressure Lamp warning Cleaning and replacing the air ﬁlter Type number MU06641 Filter unit Cleaning and replacing the air ﬁlter Replacing the internal clock battery Maxell , part number CR2032 or CR2032H Caring for the cabinet and remote control Other careInside of the projector Caring for the lens Troubleshooting There is no input signalAn improper signal is input Related messages Internal temperature is rising Button operation is not available Regarding the indicator lamps Power Lamp Temp Resetting all settings Power Lamp Temp indicator indicator indicator DescriptionShutting the projector down Signal source does not correctly work Phenomenon Cases not involving a machine defect Signal cables are not correctly connected Volume is adjusted to an extremely low levelAudio SOURCE/SPEAKER setting is not correct Brightness is adjusted to an extremely low level Color settings are not correctly adjusted Color Space setting is not suitableFrame Lock function cannot work on the current Input signal Freeze function is working Computer cannot start up in the current hardware Saving function is workingCommunication Type for the Control port is Set to Network Bridge Speciﬁcations End User License Agreement for the Projector Software

Hitachi CP-WX4021N, CP-X5021N Internal temperature is rising, Button operation is not available

Models: CP-WX4021N CP-X5021N

Related messages (continued)

Message

The internal temperature is rising.

The button operation is not available.