Using the magnify feature
1. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks to show each direction will be displayed.
Operating
MAGNIFY ON/OFF button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY
FREEZE 
PAGE 
VOLUME
UP
ON
DOWN
OFF
2. | While the triangles are displayed on the dialog, use the | KEYSTONE MY BUTTON | MUTE |
1 | 2 | ||
|
| ||
▲/▼/◄/► cursor buttons to shift the magnifying area. |
|
| |
3. | A magnifying glass icon will be displayed on the dialog when the MAGNIFY | ||
ON button is pressed while the dialog with the triangles is displayed. |
| ||
| While the magnifying glass icon is displayed on the dialog, use the ▲/▼ cursor | ||
4. buttons to adjust the magnification ratio. The magnification ratio will be adjusted | |||
| with fine steps. And changes in the ratio in single steps are subtle so they may | ||
| be hard to recognize. |
|
|
5. | Press the MAGNIFY OFF button on the remote control to exit magnification. | ||
●The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared.
●While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch the dialog between magnifying area shifting (with the triangles) and magnification ratio adjustment (with the magnifying glass icon).
●The magnification is automatically disabled when the displaying signal or its display condition is changed.
●While the magnification is active, the keystone distortion condition may vary. It will be restored when the magnification is disabled.
●Some horizontal stripes might be visible on the image while magnification is active.
●This function is not available in the following cases:
-The USB TYPE A port is selected as the input source.
-A sync signal in the range not supported is input.
-There is no input signal.
27
