Adjusting the lens
1.
2. Use the FOCUS ring to focus the picture.
3. Turn the VERTICAL adjuster fully counter clockwise. Then turn it clockwise and adjust the vertical lens position upward.
4.
5. Turn the HORIZONTAL adjuster clockwise or counter clockwise to adjust the horizontal lens position.
Operating
FOCUS ring
ZOOM ring
LOCK (Horizontal adjuster lock)
HORIZONTAL
adjuster
VERTICAL
adjuster
6.
7.
Turn the LOCK fully clockwise to tighten it and lock the horizontal lens position.
Use the FOCUS ring to focus the picture.
CAUTION ►Operate the lens adjusters gently as the lens may malfunction when subjected to shocks. It may need more strength to turn the adjusters near the adjustment limits. Be careful not to apply too much strength.
NOTE • Use a hexagon wrench to turn the VERTICAL, HORIZONTAL adjusters and LOCK. If you do not have a hexagon wrench, you can use a flathead screwdriver with more careful handling.
•Use the LOCK so that the lens does not shift from the adjusted horizontal lens position. Adjusting the vertical lens position may shift the horizontal lens position. This projector is not equipped with a lock for vertical lens position.
23
