Wireless network setup
127
2. Using a network-connected machine
If below screen appears, press the (WPS) button from the control panel
within 2 minutes.
12 When the wireless network set up is completed, click Next.
13 After the installation is finished, click Close.

Ad hoc via USB cable

If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
Network-connected computer
Software CD that was provided with your machine
A machine installed with a wireless network interface
USB cable

Creating the ad hoc network in Mac

1Make sure that the machine is connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.