Wireless network setup
120
2. Using a network-connected machine

Ad hoc via USB cable

If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
Items to prepare
Network-connected computer
Software CD that was provided with your machine
A machine installed with a wireless network interface
USB cable

Creating the ad hoc network in Windows

1Turn on your computer and the wireless network machine.
2 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
3 Review and accept the installation agreements in the installation
window. Then, click Next.