CNET Printer/Fax/Scanner/Copier appendix Example Procedures Using Configuration Main Menu

Configuring Settings Using a Web Browser

5. Work Area 6. Scroll bars for the Work Area

Displays contents such as setup items, options, and status information, in ac- cordance with the sub-menu item cur- rently selected.

Important

Use these scroll bars to scroll through the work area, when the lower/upper or rightmost/leftmost part of its content is out of sight.

❒It may not be possible to return to the previous page using the browser’s [Back] button. In such a case, click the [Update] button on the browser. If a main menu or a sub-menu is clicked again, the information you input will be cleared.

❒ Depending on the font size setting, the contents may not be displayed prop-	3
erly. It is recommended to set the font size to “medium” or smaller.

Example Procedures Using [Configuration] Main Menu

This section gives you a few example procedures, to make settings of this ma- chine using the Web Status Monitor.

	D Click [Basic Settings], and then
Configuring [Scan Settings]
	[Scan Settings] in the sub-menu ar-
A Click [Configuration] on the main	ea.
menu.	E Click [Default] in the [Select User]
The password input dialog box	area.
appears.	F Make settings to each of the setup
Note
	items on the screen.
❒ Once you set the password, the	Note
password input dialog box will
	❒ Register the scanning condi-
not appear from the second
	tions that are most frequently
time. When the dialog doesn’t
	used in [Default]. If scanning
appear, proceed to D.
	conditions are not specified for
B Input “scanner” for the user name,
	a send scan operation, the con-
and input the password.	ditions set to [Default] applies.
Note	G Click [OK].
❒ The user name is fixed to “scan-	Note
ner”.
	❒ Be sure to click [OK] to save the
❒ The password is set to “pass-
	settings you have made on the
word” as the factory default.
	currently displayed screen.
You can change the password
	Once you move to another page
using [Configuration] → [Basic
	without clicking [OK], all the
Settings] → [Scan Settings].
	settings that you have made on
C Click [OK].	the previous page will be
	cleared.

The setup screen appears. www.cnet.ie

87