CNET Printer/Fax/Scanner/Copier appendix Use ↑ and ↓ To display, When you are finished, press OK

Configuring the Scanner Settings

C Specify the IP address of this machine.

FSpecify each value for “3. Sub- net Mask ”, “4. Default Gate- way Address ”, “5. Access Control ” and “6. Access Mask ” in the same way that you have done in steps B through

	• Input the IP address using	E.
		“7. Network Boot ” appears as
	the number keys.
		the setup item currently select-
	• An IP address consists of
		ed.
	four parts, and each part has
3	a number within the range of	Note
	0 to 255. Make sure that you	❒ When you want to set no lim-
	input each part of the IP ad-	itation of access to this ma-
	dress in three digits. For ex-	chine, it is not necessary to
	ample, when you want to	specify “5. Access Control ”,
	specify “8” for a part, high-	while you need to confirm
	light the part and then input	that “6. Access Mask ” is set
	“008 ” using the number	to “000.000.000.000”.
	keys.

You can use {11} (or {#} )	G Press [OK].
and {0} keys to move the
highlighting to right and left.
Note
❒ You can use the {Clear/Stop}	The setting screen for “7. Net-
key to clear the three-digit
	work Boot ” appears.
number currently highlight-
	H Use [↑] and [↓]	to display “
ed.
	NONE ”.

D When you are finished, press [OK].

This returns to the System Set- tings menu.

Note		Note
❒ Pressing [Cancel] discards the
		❒ “*” mark appears along with
value that you have speci-
		the option currently selected.
fied, and returns to the previ-
	I While “NONE” is displayed,
ous screen.
		press [OK].
E Press [Next]
		This returns to the System Set-
“3. Subnet Mask ” appears as
		tings menu.
the setup item currently select-
ed.		Note
		❒ Pressing [Cancel] leaves the
		setting as it was (the option
		marked with “*” remains ac-
www.cnet.ie		tive), and returns to the pre-
		vious screen.

56