CNET Printer/Fax/Scanner/Copier appendix To start with an original on the exposure glass, 136

Sending Scan File by E-mail

To start with an original on the exposure glass

A Confirm that the E-mail standby screen is displayed.

When “ Select destination(s).

”is displayed, no destination is se- lected. Select a destination to dis- play “ Ready ” on the screen.

B Press the {Start} key.

6

ABK007S

Scanning the original on the expo- sure glass starts.

Note

❒To interrupt scanning, press the

{Clear/Stop} key.

After the original is scanned properly, the message “ Set the next origi-

nal(s) and press the Start key, or press [Finish] to complete.

”appears.

C Place the next original on the ex- posure glass, and then press the {Start} key.

D Repeat step C as necessary.

E Press [Finish] when all the origi- nals are scanned.

Note

❒When “Show Options after Each Scan Job ” is selected for

[End of Scan Option] under [2.Send Scan Settings], a screen for selecting the next operation appears after you press [Finish].

When scanning finishes properly, the e-mail is sent to the e-mail (SMTP) server. m appears at the upper right corner of the screen while the e-mail is sent.

Note

❒You cannot perform any opera- tions while m is displayed on the screen.

❒Do not turn the power of this machine off while m is dis- played on the screen.

mdisappears when the e-mail has been sent to the e-mail (SMTP) server, and the E-mail standby screen appears.

www.cnet.ie

136