Setting Up the Scanner

Connecting to a Network

This section explains how to connect this machine to a network.

Important

Use a 100BASE-TX (category 5) or

2 10BASE-T network cable when you connect this machine to a net- work.

A With the network cable you use for connection, create a single loop about 15cm (6”)(A) away from an end of the cable, and then attach the ferrite core that comes with this machine as illustrated below.

Note

Skip this step when you use this machine in North America.

B Insert the network cable’s end that has the ferrite core into the network interface connector of this machine.

Note

When you use this machine in North America, insert an end of the network cable into the net- work interface connector of this machine.

C Insert the other end of the net- work cable into an appropriate connector of a network device, such as an Ethernet hub.

ADG004S

www.cnet.ie

30

Page 38
Image 38
CNET Printer/Fax/Scanner/Copier appendix Connecting to a Network