CNET Printer/Fax/Scanner/Copier appendix 179

	Troubleshooting
Problem	Possible Cause and Required Action
Some of the registered destina-	• Check if [All] is displayed at the top right corner of the
tions are not displayed on the des-	“ Select destination(s). ” screen.
tination list.
	If another title like [A], [B] or [Freq.] is on the screen, it
	means that you have searched destinations using the
	{./*} (Title) key, and only the matched destinations are
	currently available for selection. In this case, press the
	{./*} (Title) key, highlight [All], and then press [OK]. See
	p.129 “To recall all available destinations” for details.
The e-mail destinations (including	When you perform a Send Scan operation, note the follow-
Cc destinations) are cleared when	ing things.
a file name is specified.	• You cannot use the following functions at the same
	time:
	• Scan to E-mail (referred to as “e-mail function”
	here)
	• Scan to Folder (SMB) (referred to as “SMB function”
	here)
	• Scan to FTP (referred to as “FTP function” here)
	When you select [File Name] and then press [Settings] on
	the screen shown above, it means that you select either
	of the SMB or FTP function, and the e-mail function is
	disabled. Because of this, the e-mail destinations are
	cleared automatically.lSpecifying [To:], [Cc:], or [Sub-
	ject] disables the SMB or FTP function. Specifying [SMB]
	disables the e-mail and FTP function. Specifying [FTP]
	disables the e-mail and SMB function.

11

www.cnet.ie

179