CNET Printer/Fax/Scanner/Copier appendix To configure network boot, Settings when you use this

System Settings

D Use [↑] and [↓] to display “

To configure network boot	DHCP ”.
settings when you use this
machine on a DHCP environment

APress [Next] three times.

“5. Access Control ” appears as
the setup item currently select-	Note
ed.	❒ “*” mark appears along with
Note	the option currently selected.
	E While “ DHCP ” is displayed,
❒ It is not necessary to specify
		3
“2. IP Address ”, “3. Subnet	press [OK].
Mask ” and “4. Default Gate-	This returns to the System Set-
way Address ”. The DHCP	tings menu.
server on your network as-	Note
signs these values automati-
cally.	❒ Pressing [Cancel] leaves the
B Specify each value for “5. Ac-	setting as it was (the option
	marked with “*” remains ac-
cess Control ” and “6. Network
	tive), and returns to the pre-
Boot ”.
	vious screen.
You can specify these values in
	G Press [Next].
the same way that you have
done in steps B through E un-
der p.55 “To configure network
boot and related settings when
a fixed IP address is assigned to
this machine”. When you are	“8. Delivery Server IP Address ”
finished, “7. Network Boot ” ap-
pears as the setup item current-	appears as the setup item currently
ly selected.	selected.
Note	Note
❒ When you want to set no lim-	❒ This item is automatically con-
itation of access to this ma-	figured when you register this
chine, it is not necessary to	machine to a delivery server op-
specify “5. Access Control ”,	erated by ScanRouter V2 Profes-
while you need to confirm	sional/Lite. Press [OK] to
that “6. Access Mask ” is set	confirm this setting after you
to “000.000.000.000”.	have registered this machine to
	a delivery server, and then

C Press [OK].	press [Cancel] to return to the
	System Settings menu.

The setting screen for “7. Net-

work Boot ” appears.

www.cnet.ie

57