CNET Printer/Fax/Scanner/Copier Duplex Scanning, Settings for Print Scan in simplex scanning, 114

Setting Originals

Settings for Print Scan in simplex scanning

•When you perform a Print Scan operation while scanning one side of an orig- inal, set the original in the ADF as illustrated below, regardless of the width of the originals.

4

114

ADG025S

•Select (1 Sided Orig. → 1 Sided Print) or (1 Sided Orig. → 2 Sided Print) to per- form simplex scanning, by using [Duplex] under [5.Print Settings] on this ma- chine. See p.79 “Duplex” for details.

Limitation

❒When you select 2-sided print, the printout orientation is fixed to top to top.

Duplex Scanning

When performing duplex scanning, place the originals in the ADF.

The setting orientation differs depending on whether the width of the original is within or larger than 297mm (11.7”).

Original width		297mm (11.7”) or less		wider than 297mm (11.7”)
	Place the original right side up,		Place the original right side up, in
	top edge first.		such a way that the top edge is
When placing originals			set on the far side of the original
on the ADF			table.
⇒ p.117 “Placing the
Originals in the ADF”
	When the original is bound on		When the original is bound on ei-
	either side:		ther side:

Setting when the net-	Set [Orientation:] to	, [Side:]	Set [Orientation:] to	, [Side:]
work TWAIN driver is	www.cnet.ie		to “ Duplex (Top to Top) ”, and
	to “ Duplex (Top to Top) ”, and
used	[Document:] to “ ADF ”.		[Document:] to “ ADF ”.