CNET Printer/Fax/Scanner/Copier appendix 188, If 7.Network Boot is set to

Appendix

K Set [Subnet Mask] to 255.255.255.0 in the same way as you have done in steps G through J.

“4. Default Gateway Address ” ap- pears as the setup item currently selected.

L Press [Next] three times, and then press [OK].

The setting screen for “7. Network

Boot ” appears.

M Confirm that [7. Network Boot] is set to “ NONE ”, and press [Cancel].

	Note
	❒ “*” mark appears along with the
	option currently selected.
	❒ If [7.Network Boot] is set to “
	DHCP ”, change it to “ NONE ”,
	and then press [OK].
	N Confirm that [10.Transmission Speed]
	is set to “ Auto ” and [11.LAN Type] is
	set to “ Ethernet ”, in the same way
	that you have done for [7.Network
	Boot].
	O Press [PrevMenu], and then [Exit].
	This exits the Scanner Features
	menu, and returns to the standby
	screen that is displayed when you
	turn the power on.
11

Important

❒Never turn off the power of this machine before the standby screen is displayed. Doing so can discard all the settings you have configured, and return this machine to its factory default status.

P Turn off the power of this ma- chine, Insert the wireless LAN card to the PC Card slot on the rear panel, and then attach the card slot cover.

ADG005S

Reference

⇒p.29 “Inserting a Wireless LAN Card”

Q Turn ON the power of this ma- chine.

R Start a Web browser on the com- puter, and enter “http://192.168. 1.2/” in the address bar.

Reference

For details about the Web Sta- tus Monitor, see p.84 “Access- ing the Scanner”.

S Click [Configuration] on the main menu.

The password input dialog box appears.

Note

❒Once you set the password, the password input dialog box will not appear from the second time. When the dialog doesn’t appear, proceed to step U.

www.cnet.ie

188