CNET Printer/Fax/Scanner/Copier Making Scan Settings, To recall a registered scan settings

Sending Scan File by E-mail

Making Scan Settings

Follow the steps below to configure scan settings before you perform a Send Scan operation. If you skip the following steps, scan is performed us- ing the settings that you have config- ured and registered to [Default] in [4.Scan Settings] under the Scanner Features menu.

A Press [Scan].

To recall a registered scan settings

A Use the {1} or {0} key to highlight [User 1], [User 2] or [User 3] on the screen, and then press [OK].

This returns to the E-mail/Send File standby screen, and the cor- responding scan settings are displayed on the third line of the screen.

	The Scan Settings screen is dis-	To configure scan settings
	played.	manually
	B Select whether you configure the
		A Use the {1} or {0} key to
6
	scan settings manually, or use one	highlight [Manual] on the
	of the user settings you have reg-	screen, and then press [Set-
	istered.	tings].

	The first page of the Scan Set-
	tings screen ( Scan Settings 1/3)
	is displayed.
	B Use [Next] or [Prev.] to scroll
Reference	through the pages, use the {1}
	or {0} key to highlight the set-
You can confirm the scan set-
	up item you want to change,
tings you have registered. See
	and then press [Settings].
p.133 “Confirming the Scan Set-
tings”.

Note

❒Press [Cancel] if you want to use

	the settings you have registered	Reference
	to [Default].
		See p.70 “Information to Reg-
❒	You cannot edit and save the
		ister in [Send Scan Set -
	settings that you have regis-
		tings]” for details about each
	tered to [User 1], [User 2] and [Us-
		of the setup items.
	er 3] here. If you want to use one
	of the user settings while chang-
	ing some of them, recall the user
	setting you want to use by high-
	lighting it and pressing [OK]
	first. And then, change the set-
	www.cnet.ie

132tings by selecting [Manual].