CNET Printer/Fax/Scanner/Copier appendix Attaching the Control Panel Unit to the Scanner Unit

Attaching the Control Panel Unit to the Scanner Unit

Attaching the Control Panel Unit to the Scanner Unit

Note

❒Use the tool that comes with this machine when you tighten or loos- en the screws.

A Insert the plug of the control pan- el unit into the socket on the scan- ner unit, as illustrated below.

ABK011S

Important

❒While making sure that the plug is facing in the correct direction, inset the plug as far as it goes into the socket. It may be a bit tight to insert the plug into the socket, so push the plug with a strength that is enough for in- serting it in place.

Note

❒To avoid the plug being insert- ed in the wrong direction, the socket has a number of tiny prongs inside of it. When you insert the plug into the socket, make sure that the socket is fac- ing in the correct direction. In- serting in the wrong direction creates the risk of damage to the plug and the socket.

❒Locating the scanner unit at an end of a desk makes it easy to attach the control panel unit.

B Insert the hooks of the control 2 panel unit to the scanner unit.

ZDLp330

C Secure the control panel unit us- ing the screw that comes with this machine.

ZDLp340

Note

❒Do not open the cover located at the lower left of the control pan- el. Changing configuration of the switches inside of the cover could cause this machine to stop operating normally.

❒ Be careful not to pinch the cable

when you attach the control www.cnet.ie

panel unit to the scanner unit.

25