CNET Printer/Fax/Scanner/Copier appendix When you are finished, press PrevMenu

Registering Print Settings

N Press [Next], and then select an op- tion for "4. Duplex " in the same way that you have done in the steps D through F.

O Press [Next], and then select an op- tion for "5. Reduce/Enlarge " in the same way that you have done in the steps L through M.

Note

❒When you select the " Custom Ratio " option, use the number keys or [-] / [+] to enter the val- ue.

P By pressing [Next] to display "6. Create Margin " and "7. Quali- ty/Speed " as the setup item, select options for each of them in the same way that you have done in steps D through F.

Q After all the settings are the way you want, press [PrevMenu].

This registers the print settings you have configured to the "De- fault" memory area, and returns to the Print Settings menu.

T When you are finished, press [PrevMenu].

This returns to the Scanner Fea- tures menu.

U Press [Exit].

This exits the Scanner Features menu, and returns to the standby screen that is displayed when you turn the power on.

Important

❒Never turn off the power of this machine before the standby screen is displayed. Doing so can discard all the settings you have configured, and return this machine to its factory default status.

3

R While the Print Settings menu is displayed, press {2}, {3} or {4} key to display a corresponding User Print Settings menu.

For example, press the {2} key to display the User 1 Print Settings menu.

S Repeat steps D through Q for each

of " User 1", " User 2", and " User www.cnet.ie

3" memory areas.

83