CNET Printer/Fax/Scanner/Copier appendix Scanner Settings, Twain Standby Time, Auto Reset Timer

Scanner Settings

Scanner Settings

This section describes the setup items contained in the Scanner Settings, and shows you how to configure the set- tings in the Send Scan Settings menu (which includes main setup items in the Scanner Settings) using the con- trol panel of this machine.

Information to Set in [System Settings]

❖1. Select Method

This item lets you select which of the functions of this machine has priority, when you use this ma- chine. You can select from the fol- lowing two options.

•TWAIN

With this option, the Network TWAIN standby screen is dis- played as the Send Scan initial screen. This means that the ma- chine stands by for receiving a scanning command from a cli- ent computer. While the Net- work TWAIN standby screen is displayed, press [Exit] to use the Delivery Server function or the Send Mail/Send File function (except for performing a Cus- tom File Send operation).

Note

❒ When you set “7. Select Method ” to “ TWAIN ”, this setup item is dimmed and cannot be con- figured.

❖ TWAIN Standby Time

This item lets you specify the time	3
after which this machine stands by

for a network TWAIN command (or a [Enter Custom Send File] com- mand), from the last operation of the control panel of this machine. When you set this item to “Off”, this machine always stands by for these commands. When you set this item to “ On ”, you can set the time within the range of 3 to 30 sec- onds in 1-second increments.

Note

❒When this machine receives a net- work TWAIN command (or a [En- ter Custom Send File] command) before the specified TWAIN standby time goes by, the mes- sage “ Unable to make config- urations because Scanner is currently in use. Please try again later. ” appears on the client computer.

❖Auto Reset Timer

• Send File		This item lets you select whether to
With this option, the Delivery		return to the state immediately af-
Server standby screen or the E-		ter power-on when this machine is
mail/Send File standby screen		not used for the specified time pe-
is displayed as the Send Scan in-		riod. When you set this item to “
itial screen. While either of these		Off ”, the screen currently dis-
screens is displayed, you can		played remains until another oper-
use this machine as a network		ation is performed or the power is
TWAIN scanner or perform a		turned off. When you set this item
Custom File Send operation		to “ On ”, you can set the time
from a client computer, when-		within the range of 10 to 999 sec-
ever no operation is performed		onds in 1-second increments.
on this machine.	www.cnet.ie

59