Cleaning the Read Area of the Platen Glass

(Only for the PC-D340/FAX-L400 Models)

Black lines may appear in copies when the ADF is used to feed documents.

This is caused by paste, ink, correction fluid, or other foreign matters in the read area of the platen glass (shaded area). Use a clean soft cloth to wipe the read area clean. Take particular care to clean at the locations where the black lines are appearing on copies.

If you have trouble getting the glass clean, wipe with a cloth moistened with water or a mild neutral detergent, and then wipe the glass dry with another cloth.

Read area

Paste, ink,

 

correction fluid,

Black lines

etc.

 

 

Copy

Paste, ink, correction fluid, and other foreign matter can soil the platen glass when you send a

IMPORTANT document through the ADF while the paste, ink, or correction fluid on the original is still wet. This is what causes black lines on copies. Whenever you load a document in the ADF, always check to make

sure that any paste, ink, or correction fluid that is on the document is completely dry.

7-2

Page 45
Image 45
Canon PC-D320, PC-D340 manual Read area Paste, ink Correction fluid Black lines Etc Copy