Energy Saver Mode

This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode.

• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30

NOTE

minutes. You can also turn off the energy saver function. (p. 8-4)

 

The energy saver function does not activate when the machine is in the following status:

When printing out copies, faxes* or other pages

When sending or receiving faxes*

While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up*

When paper jams occur

When an error code appears and the Alarm indicator flashes

When no paper is loaded in the cassette or multi-purpose tray

When PRESS OK KEY is displayed

*Only for the FAX-L400 model

Setting the Energy Saver Mode Manually

1Press Energy Saver.

• The LCD is turned off and the Energy Saver key lights up.

• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait

NOTE

about 2 seconds before pressing Energy Saver.

 

1

Introduction

Restoring from the Energy Saver Mode

1Press Energy Saver.

• The Energy Saver key goes off and the machine enters standby mode.

• The machine can be restored from the energy saver mode immediately. However, it may vary according

NOTE

to room temperature and circumstances.

 

1-9

Page 16
Image 16
Canon PC-D340, PC-D320 manual Setting the Energy Saver Mode Manually, Restoring from the Energy Saver Mode