B – Command Line Interface
Zoning Command
59042-00 A B-67
Zoning Command
Opens a Zoning Edit session in which to create and manage zone sets and zones.
Refer to the ”Zone Command” on page B-62 and the ”Zoneset Command” on
page B-65.
Authority Admin. The List keyword is available with User authority.
Syntax zoning
cancel
clear
edit
list
restore
save
Keywords cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all zoning definitions in the volatile edit copy of the zoning database. This
keyword does not affect the non-volatile zoning database. However, if you enter
the Zoning Clear command followed by the Zoning Save command, the
non-volatile zoning database will be cleared from the switch. The preferred
method for clearing the zoning database from the switch is the Reset Zoning
command.
edit
Opens a Zoning Edit session.
list
Lists all fabric zoning definitions. This keyword is available with User authority.
restore
Reverts the changes applied to the zoning database with the Zoning Save
command.
save
Saves changes made during the current Zoning Edit session. The system will
inform you that the zone set must be activated to implement any changes. This
does not apply if you entered the Zoning Clear command during the Zoning Edit
session.