B – Command Line Interface
Commands
59042-00 A B-3
B.3
Commands

The Command Line Interface provides for User and Admin authority levels.

■User authority grants viewing access to the fabric and switches using the

Show command and other read-only commands.

■Admin authority includes the User authority and grants permission to use the

Admin command. The Admin Start command opens an admin session which

provides access to the commands that change switch and fabric

configurations. Refer to the ”Admin Command” on pageB-4.

The commands and their page numbers are listed by authority level in TableB-1.

Note: Admin authority is enforced only if fabric security is enabled on

the switch. By default, fabric security is disabled. Refer to the

System keyword of the ”Set Setup Command” on page B-34 for

information about setting fabric security.

Table B-1. Commands Listed by Authority Level

User Authority Commands Admin Authority Command
Date
Help
History
Ps
Quit
Set Beacon
Show
Show Config
Show Log
Show Perf
Show Setup
Uptime
Whoami
(B-9)
(B-11)
(B-12)
(B-16)
(B-17)
(B-23)
(B-39)
(B-48)
(B-50)
(B-52)
(B-53)
(B-58)
(B-61)
Admin (B-4)
Admin Session Commands
Alias1
Config1
Fallback
Image
Lip
Passwd
Reset
Set Alarm Clear
Set Config
Set Log
Set Port
Set Setup
Set Switch
Shutdown
Test
User1
Zone1
Zoneset1
Zoning1
1Some keywords are available with User authority.
(B-5)
(B-7)
(B-10)
(B-13)
(B-14)
(B-15)
(B-18)
(B-22)
(B-24)
(B-30)
(B-33)
(B-34)
(B-38)
(B-55)
(B-56)
(B-59)
(B-62)
(B-65)
(B-67)