B Command Line Interface
Show Perf Command
B-52 59042-00 A
Show Perf Command
Displays performance data for all ports.
Authority User
Syntax show perf
byte [bytes/sec]
frame [frames/sec]
Keywords byte [bytes/sec]
Displays port performance data for all ports in bytes/second. The display is
refreshed according to the interval in seconds given by [bytes/sec]. If [bytes/sec]
is omitted, the display is refreshed every second. Type q and press t he Enter key
to stop the display.
frame [frames/sec]
Displays port performance data for all ports in frames/second. The display is
refreshed according to the interval in seconds given by [frames/sec]. If
[frames/sec] is omitted, the display is refreshed every second. Type q and press
the Enter key to stop the display.
Notes The Show Perf command with no keywords displays performance data in
frames/second and bytes/second at that moment.
Examples The following is an example of the Show Perf Byte command:
SANbox2 $> show perf byte
Displaying bytes/sec data... (Press ’q’ and the ENTER key to stop display)
0 1 2 3 4 5 6 7
-----------------------------------------------------------------------------
76M 0 0 32M 0 0 0 43M
78M 0 0 34M 0 0 0 43M
78M 0 0 34M 0 0 0 43M
77M 0 0 33M 0 0 0 44M
77M 0 0 33M 0 0 0 44M
84M 0 0 40M 0 0 0 43M
83M 0 0 39M 0 0 0 43M
80M 0 0 35M 0 0 0 45M
77M 0 0 33M 0 0 0 44M
78M 0 0 33M 0 0 0 44M
75M 0 0 29M 0 0 0 45M
74M 0 0 28M 0 0 0 46M
q