Korg sampler, music workstation manual Changing the key transposing/ modulating, Mute tracks

A dialog box will appear.

Input the number of measures for the song. For this example, select 008 (8 measures) and press the OK but- ton.

The performance data from measures 1–8 will remain, and the data of subsequent measures will be deleted. When you press the SEQUENCER [START/STOP] key to play the song, playback will stop at the end of the 8th measure.

If you are using Track Play Loop, check whether the measures specified for “Loop Start Measure” and “Loop End Measure” would be deleted. If they would be deleted, use “Move Measure” (☞PG p.72) etc. to move the data into the playback area before you execute this operation.

4Mute tracks.

Press the [EXIT] key to select P0: Play/REC, and access the Program T01–08/T09–16 page.

Mute all tracks other than tracks 3 and 4. When you play back, you will hear only the electric piano and guitar performances.

5As described in steps 1–4, set song S001: VERSE to 008 (8 measures), making it an eight measure song.

Then mute all tracks other than tracks 1–3. When you play back, you will hear only the drums, bass, and elec- tric piano.

6As described in steps 1–4, set song S002: CHORUS to 008 (8 measures), making it an eight measure song.

4.Changing the key (transposing/ modulating)

Here’s how to change the key of a song.

1Select song S002: CHORUS.

2Select the Sequencer P5: Track Edit page.

3Use “Track Select” to select T02 as the track whose pitch will be changed.

4Specify the measures for which the key will be changed.

Select “From Measure,” and use the VALUE controllers to set this to 001. Next select “To End of Measure,” and specify 008.

5Select the page menu command “Shift/Erase Note.”

A dialog box will appear. If you did not specify the range of measures in step 4, set “From Measure”–“To Measure” to specify the range that will be edited.

Turn on the Replace radio button, and set “Shift Note” to +003. (☞PG p.74)

Press the OK button. The pitch of track 2 will be raised three semitones.

6Use the same procedure to raise the pitch three semi- tones for each track on which performance data is recorded. However, do not change the key of track 1 which uses a drum kit.

If you change the key of a track that is using a drum kit, the relationship between the notes and the instru- ments of the drum kit will be shifted, and the sequence will not play the correct rhythm instru- ments.

Basic functions
Saving data
Loading data
Program	settings
Combination	settings
Producing	songs
Sampling	settings
Creating a	CD
SMF	playback
System	settings
Drum kit	settings
Arpeggiator	settings
Effects	settings
Other	functions

89