Loop All Tracks, Multi multitrack recording

•Loop All Tracks

This method lets you continue recording as you add musical data.

The speciﬁed region can be recorded repeatedly. This is ideal when recording drum phrases, etc.

1Use “Track Select” to select the track that you want to record.

2Set the “Recording Mode” to Loop All Tracks.

If “Multi REC” is checked, it will not be possible to select Loop All Tracks.

3In “M (Loop Start Measure), “M (Loop End Mea- sure)” specify the area that you wish to record.

For example if you specify M004–M008, recording will occur repeatedly (as a loop) from measure 4 to measure 8.

4In “Location,” specify a location several measures earlier than the point at which you wish to begin recording.

5Press the SEQUENCER [REC/WRITE] key, and then press the SEQUENCER [START/STOP] key.

Playback will begin. When you reach the starting loca- tion you speciﬁed in step 3, recording will begin. Play the keyboard and operate controllers such as the joy- stick to record your performance.

When you reach the ending location you speciﬁed in step 3, you will return to the starting location, and continue recording.

The musical data that is loop-recorded will be added to the previously-recorded data.

6You can also erase speciﬁc data even while you con- tinue loop recording.

If you press the SEQUENCER [REC/WRITE] key dur- ing loop recording, all musical will be removed from the currently selected track as long as you continue pressing the key.

By checking the “Remove Data” check box you can erase only the speciﬁed data. During loop recording, press the note that you wish to delete, and only the data of that note number will be deleted from the key- board as long as you continue pressing that note.

Similarly, bender data will be deleted as long as you tilt the joystick in the X (horizontal) direction, and after touch data will be deleted as long as you apply pressure to the keyboard.

When you are once again ready to record musical data, uncheck the “Remove Data” check box.

7Press the SEQUENCER [START/STOP] key.

Playback will end, and you will return to the recording start location that you speciﬁed in step 4.

If Loop All Tracks is selected, normal playback will be looped as well.

•Multi (multitrack recording)

Multitrack recording allows you to simultaneously record onto multiple tracks, each with a different chan- nel. This method can be used with overwrite, overdub, manual punch-in, and auto punch-in recording.

Using the arpeggiator to record multiple tracks simultaneously

A multi-track performance using the arpeggiator func- tion can be recorded using multi recording.

When simultaneously recording multiple tracks using the RPPR function

You can use multitrack recording to simultaneously record the playback of multiple tracks that are being triggered by the RPPR function. For the procedure, refer to “Realtime-recording an RPPR performance” (☞p.94).

When simultaneously recording multiple tracks of MIDI data from an external sequencer.

1Make sure that the TRITON STUDIO’s MIDI IN and the external sequencer’s MIDI OUT are connected by a MIDI cable.

If they are not connected, turn off the power, make the connection, and then turn the power back on again. (☞PG p.258)

If the EXB-mLAN option is installed, MIDI data can be received from an mLAN device. (☞PG p.141)

2Set the MIDI Clock (Global P1: MIDI page “MIDI Clock”) to External, so that TRITON STUDIO will synchronize to the MIDI clock of the external sequencer.

Make sure that “Receive Ext. Realtime Commands” is checked.

3Create a new song, and in the Sequencer P0: Play/ REC, Preference page, check the “Multi REC” check box. Set the “Recording Mode” to Over Write.

4Select the P0: Play/REC, Program T01–08/T09–16 page.

For the tracks that you are not recording, set “PLAY/

MUTE/REC” to PLAY or MUTE.

5In P2: Trk Param, MIDI Ch page “MIDI Channel,” specify the MIDI channel for each track.

Set the MIDI channel of each external sequencer track to match the MIDI channel of each TRITON STUDIO track. Data of the corresponding channel will be recorded on each TRITON STUDIO track.

Make sure that “Status” is set either to INT or BTH.

6Press the [LOCATE] key to set the location to 001:01.000.

7Press the SEQUENCER [REC/WRITE] key to enter recording-standby mode.

8Start the external sequencer.

The TRITON STUDIO’sequencer will receive the MIDI Start message transmitted by the external sequencer, and will automatically begin recording.

	Basic functions

	Saving data
	Loading data
	Program	settings
	Combination	settings


	Producing	songs


	Sampling	settings
	Creating a	CD
	SMF	playback
	System	settings
	Drum kit	settings
	Arpeggiator	settings
	Effects	settings
	Other	functions

Korg sampler, music workstation manual Loop All Tracks, Multi multitrack recording

Models: sampler music workstation

•Loop All Tracks

•Multi (multitrack recording)

Basic functions