Record a sample | Korg sampler, music workstation

6. Record a sample

1Press the Recording tab to access the P0: Recording, Recording page.

Press the SAMPLING [START/STOP] key to enter record-ready mode.

Speak the word that you want to sample. (Example: “It’s”)

Recording will start when the input exceeds the “Level” –30dB level.

When you ﬁnish speaking, press the SAMPLING [START/STOP] key to stop sampling.

A sample has now been created. The sample you recorded is automatically assigned to “Sample (Sam- ple Select).”

Press the “OrigKey” note (C2 in this case), and you will hear the sound that was sampled.

3Press the Create button to create a new index.

Press the SAMPLING [START/STOP] key.

Speak the word that you want to sample. (Example: “So”)

When you ﬁnish speaking, press the SAMPLING [START/STOP] key to stop sampling.

5Repeat steps 3 and 4 to record additional samples.

(Example: “Easy,” “To,” “Sample,” “With” “TRITON STUDIO”)

Play a chromatic scale upward, starting at the C2 key. The samples you recorded will be played one after another.

(In this example, playing notes C2 through F#2 in sequence will produce “It’s So Easy To Sample With

TRITON STUDIO”)

Applying an insert effect to the audio input and sampling the result

1In step 5 of the preceding section “1. Connect a mic and make input settings,” set the Input1 “Pan” to C064, and “BUS” to IFX1.

2Press the [MENU] key to access the Jump page, and press P8: Insert Effect.

The P8: Insert Effect page will appear.

Press the Insert FX tab to access the Insert FX page.

3Select “IFX1,” use the numeric keys to enter [5], [2], and press the [ENTER] key to conﬁrm 052: Reverb Hall.

Press “IFX1 On/Off” to turn it ON.

4Speak into the mic, and verify that reverb is applied to the sound.

You can adjust the effect settings in the IFX1 page (IFX1 tab).

5After pressing the [EXIT] key, press the Recording tab to access the P0: Recording, Recording page.

6Set “Sample Mode” to Stereo.

Now the sound of the internal LR channels can be sam- pled in stereo.