Korg sampler 133, Linking the arpeggiator to the combination, Combination INT-D080 Old Vox Organ

0The “Status,” “MIDI Channel” and “Assign” settings shown in the LCD screen of steps 2 and 3 can be made so that certain timbres will sound only when the arpeggiator is On, and will be silent when the arpeggiator is Off.

Although this is a somewhat sophisticated editing technique, we will describe the settings of one of the preset combinations as an example.

Combination INT-D080: Old Vox Organ

Select combination INT-D080: Old Vox Organ, and play it.

Before you play, make sure that the global MIDI channel (Global P1: MIDI “MIDI Channel”) is set to 01.

•Arpeggiator A is assigned to T (timbre) 7 and 8. When you play the keyboard, the arpeggio pattern U396(User): Dr-Jump Up DnB will sound only the T7 program INT-A068: HipHop Kit.

•The arpeggio pattern uses Fixed Note mode, which is suitable for playing drums from the arpeggiator (Global P6: User Arpeggio, Pattern Setup page “Arpeggio Tone Mode” Fixed Note).

With this setting, the arpeggio pattern will always play the specified pitches regardless of the note numbers received from the keyboard. (☞PG p.152)

•The A “Bottom Key” and “Top Key” (Combination P7: Edit-Arp., Scan Zone A/B page) are set so that arpeggiator A will operate only for notes B3 and lower.

•Arpeggiator A is also assigned to T8, but this is so that the T7 program INT-A068: HipHop Kit will sound only when the arpeggiator is on.

Notice the timbre settings for T7 and T8

	Status	MIDI Channel	Assign
T7	INT	02	A
T8	Off	Gch	A

•If the arpeggiator is off, playing the keyboard will sound the timbre(s) that are set to Gch or to the global MIDI channel (in this case, 01). Since the “MIDI Channel” of T7 is set to 02, it will not sound. T8 is set to Gch, but since “Status” is Off it will not sound.

•Any MIDI channel that is assigned to a timbre will trigger the arpeggiator. In this case, these will be “MIDI Channel” 02 and Gch (global MIDI channel). When the arpeggiator is on, playing the keyboard will trigger arpeggiator A which is assigned to T8 (Gch). T7 will be sounded by arpeggiator A. Since the “Status” of T8 is Off, it will not sound.

•Since the “Status” of T8 is Off, it will not sound, regardless of whether the arpeggiator is on or off. It is a dummy timbre that causes T7 to sound only when the arpeggiator is on.

Combination INT-C005: “In The Pocket”

Select and play combination INT-C005: “In The Pocket.”

Before you play, make sure that the global MIDI channel (Global P1: MIDI “MIDI Channel”) is set to 01.

•Arpeggiator A is assigned to T7 and T8, and arpeggiator B is assigned to T5. When you play the keyboard, the T7 program INT-A068: HipHop Kit will be sounded by the arpeggio pattern U444(User): Dr-In The Pocket. The T5 program INT-D034: Chord Trigger will be sounded by the arpeggio pattern U123(I-A/B): Syn-Echo.

•The B “Bottom Key” and “Top Key” (Combination P7: Edit-Arp., Scan Zone page) are set so that arpeggiators B will operate only for the G3 note and above.

•Arpeggiator B is assigned to T8 as well, but this setting is so that the T7 program INT-A068: HipHop Kit will sound only when the arpeggiator is on. Refer to the preceding section “Select and play Combination INT-D080: Old Vox Organ.”

Linking the arpeggiator to the combination

If you want the arpeggiator settings of a combination to become active when that combination is selected, check Combination for “Auto Arpeggiator” (Global P0: Basic Setup, Basic page).

Basic functions
Saving data
Loading data
Program	settings
Combination	settings
Producing	songs
Sampling	settings
Creating a	CD
SMF	playback
System	settings
Drum kit	settings
Arpeggiator	settings
Effects	settings
Other	functions

133