Korg music workstation Sampling key, Play key, Global key, Disk key, Compare key, Value slider

[SAMPLING] key

Sampling mode will be selected.

[S.PLAY] key

Song Play mode will be selected.

[GLOBAL] key

Global mode will be selected.

[DISK] key

Disk mode will be selected.

7. [COMPARE] key

Use this key when you wish to compare the sound of the program or combination that you are currently editing with the un-edited sound already in memory. You can also use this key to make “before and after” comparisons when recording or editing in Sequencer mode (☞p.17).

8. VALUE controllers

The following VALUE controllers are used to set the value of the selected parameter (☞p.17).

[VALUE] slider

Use this to modify the value of a parame- ter. This controller is convenient when you wish to make large changes in the value.

This slider can also be used as a modula- tion source.

[ ][ ] keys

These are used to increase or decrease the parameter value in steps of one. It is convenient to use these to make fine adjustments.

[VALUE] dial

Use this dial to modify the value of the parameter.

Numeric keys [0] – [9], [ENTER] key, [–] key [./10’s HOLD] key

Use these keys to numerically input a parameter value. Use numeric keys [0]–[9], the [–] key, and the [./10’s HOLD] key to enter the value, and press the [ENTER] key to confirm it. The [./10’s HOLD] key lets you input a value with a decimal point. The [–] key inverts the sign (+/–) of the parameter value.

The [./10’s HOLD] key is also used when you wish to hold the 10’s place while selecting programs or combina- tions.

By holding down the [ENTER] key and pressing a numeric key [0]–[9], you can select up to ten page menu commands in the current page.

9. LCD screen

The TRITON STUDIO features a Touch-View system that uses a touch-panel LCD screen.

By touching on objects that are shown in the LCD screen, you can select pages, tabs, and parameters, and set values (☞p.8).

10. [EXIT] key

When a dialog box is open, this key will cancel the set- tings made in the dialog box and close the dialog box (cor- responds to the Cancel button). If a popup menu or page menu is open, pressing [EXIT] will close the menu.

When in P (page) 1–9 of each mode, pressing the [EXIT] key will move to P (page) 0 of that mode.

11. [MENU] key

Use this key to move between pages. When you press the [MENU] key, a list of the pages in the mode will appear in the LCD screen. Press the desired page, and you will move to that page. You can also move to a page by hold- ing down the [MENU] key and pressing the correspond- ing numeric key [0]–[9] (☞p.16).

12. BANK keys

These keys are used to switch the program/combination bank.

PROG BANK:

[INT-A], [INT-B], [INT-C], [INT-D], [INT-E] (SMPL), [INT-F] (MOSS), [INT-G] (GM), [EXB-A], [EXB-B], [EXB-C], [EXB-D], [EXB-E], [EXB-F], [EXB-G]

COMBI BANK:

[INT-A], [INT-B], [INT-C], [INT-D], [INT-E], [EXB-A], [EXB-B], [EXB-C], [EXB-D], [EXB-E], [EXB-F], [EXB-G]

In Program mode, these keys select the program bank.

In Combination mode, these keys select the combination bank. When assigning a program to the various timbres in a combination, then these keys will select the program bank. In this case, the LED of the program bank selected for the timbre will light.

In Sequencer and Song Play modes when the edit cell (highlighted area) is located at the program of each track, these keys select the program bank just as in Combination mode.

If you repeatedly press the [INT-G] key when selecting a program, the bank selection will cycle through all of the GM(2) banks and drum banks in the order of G, g(1), g(2)– g(8), g(9), g(d), G ... each time you press the key.

The [INT-F] bank can be selected in Program mode only if the EXB-MOSS option is installed.

4