Korg sampler manual Simple combination editing, An example of editing, Press the Prog. Select tab

Simple combination editing

A combination is a set of multiple (up to eight) programs, and allows you to create complex sounds that could not be produced by a single program.

Combination editing refers to the process of modifying the sound of a combination by changing the program selected for each timbre or by adjusting each timbre’s key- board range and velocity range, or by modifying the con- troller, and effect settings.

You can edit a combination in Combination P1: Edit-Pro-

gram/Mixer–P9: Edit-Master FX, but can also make set- tings for “Program Select, “Pan,” and “Volume” in Combination P0: Play as well.

Selecting the program for a timbre

3Press the Prog. Select tab.

When a timbre’s “Status” is turned Off, the program assigned to that timbre will not sound. If the “Status” is set to INT, the program will sound. Try setting timbres 1 and 2 alternately to INT and Off, and listen to the result.

Only timbre 1 will sound

Quick Start

Power on/off

Demo song

An example of editing

As an example, here’s how to do some simple editing on combination Bank INT-C086: Shiny DigiPiano.

1Press the [COMBI] key (the LED will light) to enter Combination mode.

2Select INT-C086: Shiny DigiPiano.

Timbre 2

Timbre 1

This combination layers (simultaneously sounds) the programs of timbre 1 and timbre 2. A typical electric piano INT-D017:Pro-Stage EP is assigned to Timbre 1, and a digital-type electric piano INT-D049: Classic Tines is assigned to Timbre 2. These two programs are layered to create a frequently-heard type of electric piano sound.

A timbre consists a of program together with multi- ple parameters that control that program. A combina- tion can use up to eight of these timbres.

Only timbre 2 will sound

After you have listened to the sound, set the “Status” for timbres 1 and 2 to INT.

As an alternative to changing the “Status” setting, you can select the page menu command “Solo Selected Timbre” to hear the sound of an individual timbre.

4Now let’s change the program of timbre 2 to a differ- ent program.

Press the timbre 2 “Bank/Program (Program Select)” switch (it will be highlighted).

Use the BANK [INT-A]–[EXB-G] keys, and VALUE controllers to select a program.

Alternatively, you can select a program from a popup menu. Press the popup button, and select the desired program from the popup menu that appears.

5You can also select programs by category. Press Cate- gory popup button for timbre 2.

The “Category/Timbre2 Program” select menu will appear. In this combination, a program from the “Key- board” category is selected for both timbres 1 and 2.

Playing	programs
Playing	combinations
Using	controllers
Arpeggiator
RPPR
Program	editing
Combination	editing
Sampling
Song

35