Korg music workstation, sampler Sounding a beep when the LCD screen is pressed, Shortcuts, 146

Sounding a beep when the LCD screen is pressed

If the Global P0: Basic Setup, System Preference page “Beep Enable” check box is turned on, a beep will sound when you press an object in the LCD screen.

Uncheck this if you do not want a beep to be sounded.

Using the TRITON STUDIO as a data filer

MIDI exclusive data transmitted from an external device can be received by the TRITON STUDIO and saved on a floppy disk, or other media (the Data Filer function). This is done using the Disk mode Save page “Save Exclusive” page menu command (☞PG p.168).

Setting the calendar function

Here’s how to set the date and time for the TRITON Stu- dio’s internal calendar. The date and time are recorded when you save data. Use the page menu command “Set Date/Time” (Disk, Utility page) to make these settings.

You will need make these settings after you purchase the TRITON Studio, and after you replace the calen- dar backup battery.

1Press the [DISK] key to enter Disk mode.

2Press the Utility tab.

3Select the page menu command “Set Date/Time.” The following dialog box will appear.

4Use the VALUE controllers to set “Year,” “Month,” “Day,” “Hour,” “Minute,” and “Second” to the correct year, month, day, hour, minute, and second.

5Press the OK button.

If the calendar backup battery runs low, a message of “Battery voltage for calendar IC” will appear in the LCD screen. If the calendar backup battery runs down completely, the calendar will be initialized, and the date and time will not be recorded correctly.

You can replace the calendar backup battery by your- self. Refer to PG p.286 for details.

Shortcuts

[MENU] key + numeric keys [0]–[9]

• Accesses the pages within a mode

[ENTER] key + numeric keys [0]–[9]

•Accesses the page menu commands in each page (up to ten items)

[ENTER] key + keyboard

•Inputs note number values or velocity values

•Selects “KEY” in Global P5: Drum Kit, Sequencer P6: Pattern/RPPR, RPPR Setup page

•Selects base key and index in Sampling mode

[ENTER] key + [LOCATE] key

•In Sequencer mode and Song Play mode, sets the current location as the “Location” (equivalent to the “Set Location” page menu command)

146