McDATA 3000 manual EPort Disk Streaming Settings, Enable/Disable EPort Disk Streaming

E_Port Disk Streaming Settings

1.Ensure that compression is enabled on the circuit before enabling this part of the feature.

2.Double-click the circuit to open the Circuit Parameters dialog box.

3.Click the Advanced tab.

4.Select the Enable Transport CRC for all data option to enable CRC checking for all data passing through the circuit.

5.Click OK.

E_Port Disk Streaming Settings

Enable/Disable

E_Port Disk

Streaming

The E_port Disk Streaming function is disabled by default. When your network has been configured, you can verify the settings for E_port Disk Streaming on the Advanced Tab of the Fibre Channel interface screen.

Use the following procedure to verify and change your E_port Disk Streaming setting once your network has been configured:

1.Double-click the Fibre Channel interface in the Network Map.

D-9