McDATA 3000 manual Gathering the IP

5

Configuring a 1x1 Ethernet Wide Area Network

6.Adding an IP Circuit

7.Creating a Data Path

8.Delivering the Configured Network

	NOTE: For help on the configuration process, click the Help button on the
	active dialog box or press the F1 key.
Gathering the IP	Before starting the configuration procedure in ConfigManager you
Addresses	will need to gather the IP addresses for your network. The IP host
	addresses and the completed UltraNet Edge Storage Router
	Configuration IP Address Worksheet in Appendix J will be used as
	examples in the configuration process.
	Figure 5-1 shows an example of a network configured with two
	UltraNet Edge 3000s as a 2x2 implementation.
	192.168.101.4		IP Cloud		192.168.201.4
		Router/			Router/
		Switch			Switch
		Default				Default
		Gateway 1				Gateway 2
			Fibre	Fibre			Fibre	Fibre
			Channel	Channel			Channel	Channel
	192.168.10.3		Switch	Switch	192.168.20.3		Switch	Switch
	Maintenance IP				Maintenance IP
	192.168.10.1				192.168.20.1
	UltraNet Edge	192.168.100.1			UltraNet Edge	192.168.200.1
	Storage Router	Ethernet WAN			Storage Router	Ethernet WAN
	Node 10				Node 20

192.168.100.4	IP Cloud	192.168.200.4
			Router/
Router/		Sb039
Switch			Switch

Figure 5-1Sample E_port Ethernet WAN with two UltraNet Edge 3000s

Using the Configuration IP Address Worksheet in Appendix J, gather the

IP addresses and associated subnet masks to configure each UltraNet

Edge 3000.

You will need the following addresses:

•UltraNet Edge 3000 Ethernet Maintenance Interface IP host address

5-2 McDATA UltraNet Edge 3000 User Guide