McDATA 3000 manual Delivering the Configured Network

Delivering the Configured Network

•Cancel - Click Cancel to exit the FICON Global Settings Wizard without saving the configuration changes.

•Help - Click Help, or press F1, to see information about this dialog.

Delivering the Configured Network

Now that you have configured a sample network, or if you made changes to the configuration parameters, you must deliver the configuration information for each node defined on the active network map to the actual nodes.

The configuration information can be delivered in two different ways, File>Deliver Network or File>Delivery Wizard.

The configurations can be delivered via the Maintenance Port IP or the PPP Port IP. If you do not have direct IP connectivity, use the PPP option. See “Setting the Delivery Properties” below.

NOTE: If you used the “Manual Configuration of the Initial IP Settings” procedure in Appendix H, complete the “Update UltraNet ConfigManager with the Manual Configurations” procedure before delivering the configured network.

Setting the Delivery	To set the properties for delivery of the network map configurations,
Properties	use the following procedure:
	1. Right-click the desired node	, then select Properties.
	The Node10 Properties (UltraNet Edge 3000) screen appears.

2. Click on the drop-down menu to select the Delivery Interface.

Configuring FICON Extension 8-31

8