McDATA 3000 manual Display the User Interface Commands, Ip show Ip fwdtbl

13

User Interface Commands for the UltraNet Edge 3000

Display the User

Interface

Commands

IP

ip show

ip fwdtbl

This section does not provide a complete listing of the commands issuable on the UltraNet Edge 3000, for information on these and other commands issuable on the UltraNet Edge 3000 please refer to the UltraNet Edge Storage Router Command Reference on the UltraNet Edge Storage Router Technical Documentation Library CD.

For troubleshooting information on FC/SCSI Tape Pipelining, see the “Troubleshooting FC/SCSI Tape Pipelining (Device Extension)” section in this chapter.

Use the following procedure to display the user interface commands.

1.Telnet into the Ethernet maintenance interface of the UltraNet Edge 3000.

2.To display the menu of all the possible commands on the UltraNet Edge 3000, type help at the main menu prompt.

tm.0x20> help

The list displayed after typing the help command will show every possible command that can be typed at the main menu prompt. Some commands will enter into their own user interface with their own submenu of commands. When you enter into another user interface, type help again to display that user interface’s submenu of commands.

The IP user interface is used to display configured IP interfaces. The commands in the IP user interface are useful when troubleshooting WAN connectivity problems. The IP interface provides information regarding the IP addresses in the network and routing information within the node.

For further information on the IP user interface commands, refer to the ip commands section in the “Nucleus Commands” chapter of the UltraNet Edge Storage Router Command Reference. The following sections highlight the commands useful for troubleshooting.

This command displays the current status of all IP defined interfaces and any "attached" users.

This command displays the current status of the routing IP forwarding table for the UltraNet Edge 3000 and is useful when diagnosing routing problems within the IP network.

13-2 McDATA UltraNet Edge 3000 User Guide