McDATA 3000 manual Repeat through for the second node Node, License Information procedure

6

Configuring a 2x2 Ethernet Wide Area Network

NOTE: If a bootp message is not received within 45 seconds, you will get the following Warning message. Use the procedure to manually configure the Maintenance IP Port. The procedure is found on the UltraNet Edge Storage Router Technical Documentation Library CD, titled, Manual Configuration of the Initial IP Settings.

	5.	Repeat step 1 through step 4 for the second node (Node 20).
	6.	Continue the configuration process by proceeding to the “Setting
		the License Information” procedure.
Setting the License	The License Key Wizard determines which features can be enabled
Information	for your network.
	1.	Right-click on Node10 and select Set License Info from the menu
		that appears.

The License Wizard - Introduction dialog box appears.

6-10 McDATA UltraNet Edge 3000 User Guide