McDATA manual UltraNet Edge 3000 Security

UltraNet Edge 3000 Security

UltraNet Edge 3000 Security

The UltraNet Edge 3000 is shipped with a default password. For security purposes you will need to change the default to your own password. Use the following procedure to change or disable the UltraNet Edge 3000 password.

1.Telnet into the UltraNet Edge 3000 box.

2.When prompted for the password, enter the default password (password).

3.To change the default, enter the system passwd command at the prompt.

tm.0x10> system passwd

4.Enter the old password when prompted (the default is password).

5.You will then be prompted for your new password, type and then retype the same password to confirm. The password is not echoed to the screen.

A password may contain 1->39 characters. You may disable the password by pressing the Enter key twice when prompted for the new password.

Introduction 1-7

1