|
| Using the Sysclean Command |
|
| |
|
|
|
| ||
|
|
|
|
|
|
* CNT Edge - Firmware Build #812 | * |
|
|
| |
|
|
| |||
|
|
| |||
* Copyright 2001, Computer Network Technology, Inc. *
*****************************************************
Copying ROM to RAM.... done
Uncompressing kernel.... done.
Starting vxWorks....
Configuring PCI buses...
bridge #0.... bridge #1.... bridge #2.... bridge
#3.... bridge #4..
Configuring buffer memory bridges....
bus #1.... bus #2.... bus #3.... bus #4....
Buffer memory size: 67108864 bytes PCI configuration done.
Inititalizing disk..... and filesystem...... done
Starting network initialization.....
Attached TCP/IP interface to lnPci unit 0 Attaching network interface lo0... done. Network initialization complete
Adding 2689 symbols for standalone. Processor: MPC750 66.67/500.00 MHz Board: Edge (HwRev 0) - Map A - Memory Size: 0x4000000.
/dsk/ - Volume is OK
# Loading system DLLs
ld 0,0,"/dsk/vx/core.dll"
[ Loaded CNTCORE, build #358 ] value = 28191040 = 0x1ae2940 ld 0,0,"/dsk/vx/httpd.dll"
[ Starting HTTP server, build #149 ] value = 28185848 = 0x1ae14f8
prom> [ENTER] prom>
[ Autoboot canceled (tty) ]
6.At the prom level, type sysclean.
prom> sysclean
This will clean out the active configuration directory and the Maintenance IP port information.
The following text is the output from the sysclean command:
prom> sysclean
Deleting active Edge configuration!
deleting file /dsk/cnt/configs/active/SLOT01/CFG/IP deleting file /dsk/cnt/configs/active/SLOT01/CFG/ARP deleting file /dsk/cnt/configs/active/SLOT01/CFG/ETHERNET deleting file /dsk/cnt/configs/active/SLOT01/CFG/FIBRECHA
deleting file /dsk/cnt/configs/active/SLOT01/CFG/CNTNODE
