McDATA 3000 manual Broadcast Data

8

Configuring a 1x1 Ethernet Wide Area Network

Broadcast Data

The “broadcast data” only appears the first time you configure, when the Alphanumeric messages window displays BOTP on the front of the UltraNet Edge 3000.

2.Click on the line of text (the Broadcast Data) that appears in that section to cause the serial number and MAC Address fields to appear.

3.Modify the Assign IP Address, the Assign Netmask address, and the Assign Gateway address in the middle of the dialog box to the maintenance interface and default gateway addresses.

NOTE: If you are using the Configuration IP Address Worksheet, enter the following information:

For Node10, enter the IP address labeled and the gateway address labeled

.

For Node20, enter the IP address labeled and the gateway address labeled

.

8-8 McDATA UltraNet Edge 3000 User Guide