McDATA 3000 manual Replacing the OC-3 ATM Long Wave Transceiver

Replacing the OC-3 ATM Long Wave Transceiver

Replacing the OC-3 ATM Long Wave Transceiver

12

Removing the OC-3

ATM Long Wave SFP

Transceiver

Removing the Plain

Metal Clasp

Transceiver

This section provides procedures for both removing and installing the OC-3 ATM long wave transceiver.

Tools required: No special tools are required.

CAUTION

Attach a wrist strap and follow ESD procedures during the handling of all electronic components.

The transceivers are hot swappable, which means they can be replaced while the Edge unit is in operation.

CAUTION

Laser radiation is invisible and can damage the eye. Unterminated optical connectors may emit laser radiation. Do not view the beam with the naked eye or with optical instruments. Dust caps and dust covers MUST be left in place on all unterminated bulkhead receptacles and on the end of every radiating fiber jumper.

The OC-3 ATM long wave transceiver has a blue plastic body with a plain metal clasp. Use the following procedure to remove the transceiver from the interface card.

1.Remove the fiber optic cabling from the transceiver.

2.Lift the metal clasp up.

3.Carefully pull the transceiver out of the interface card.

Hardware Maintenance 12-27